Clivet offers a wide range of air handling units and air conditioning units that are extremely customizable. They can be fitted with electronic filters and photocatalytic oxidation lamps.

The air handling units are also available in a hygienic version with TUV-SUD certification.

  • AQX: Air handling units with Eurovent certification
  • AQX H: Hygienic air handling units with TUV-SUD certification
  • SAHU: Air conditioning units
Back

AQX

AQX 1-32
AQX
Air conditioning unit
For the air treatment
With modular sections
Indoor and outdoor installation
Airflow from 350 to 44400 l/s 
(from 1260 to 16000 m3/h)
Go to Energy Tool
Product Sheet
  Product Sheet AQX - AIRLine SP13F001GB-09
Details
  • two types of structure and panelling, 50 mm and 60 mm, which allow thermal break classes T2/TB3 and T2/TB2 to be achieved; 
  • 32 standard sizes with continuous air flow coverage at frontal speed of 2.2 to 2.5m/s;
  • customisation of the dimensions in height and width with a 50 mm pitch to meet the most stringent architectural constraints.
  • sandwich-type double-sheet panels with injected polyurethane or mineral wool thermal and acoustic insulation in between, thermal cut between the sheets, 50 or 60 mm thick, seven different types of sheet available;
  • modular structure with smooth internal surfaces to minimise dust accumulation and facilitate cleaning and disinfection;
  • for indoor or outdoor installation with protective roof;
  • wide range of air filtration solutions from coarse filters, medium filters with rigid or floppy pockets, absolute, electronic, activated carbon, high and very high efficiency filters;
  • germicidal and virucidal solutions with UV-C lamps or photocatalytic oxidation modules;
  • static, rotary, run-around heat recovery units;
  • water, direct expansion, steam, thermal oil, electric heat exchangers;
  • adiabatic humidification systems, self-generated or network steam, water spray, washers;
  • internal condensate collection tanks with anti-condensate insulation, with inclination towards the discharge, made of aluminium or stainless steel;
  • centrifugal fan sections with belt and pulley drive, plug-fan radial with brushless EC motors, electric fans;
  • without control systems or complete with probes, actuators, wiring, electrical panel with control system and unit management logic.